How to make flower pots with your own hands: outdoor, indoor, hanging | Step by Step Charts (120+ Original Photo Ideas & Videos)

19295 Views 0

To grow plants and create extraordinary flower arrangements, different types of containers are required. Some of them can be found in the nearest store. But in most cases, their shape and design leaves much to be desired. Therefore, today we will master the technique of making flower pots with our own hands.

Content:

What materials are best to use?
Cement products of unusual shape
- Main stages of work
- Drying products. decoration
Wicker flowerpot-basket
- Preparation of willow twigs
- Weaving methods
Newspaper weaving
- Preparation of blanks
- Newspaper weaving methods
Papier-mâché planter
Gypsum planters
Clay pot
Use of old items
Planter decoration
Mosaic planter
Using twine
- Decorating with fabric or lace
  - How to make a pot of gypsum with your own hands

Plastic bottles, what can be done from them? Useful DIY crafts: for home and garden (60+ Photo Ideas & Videos) + Reviews

What materials are best to use?

Floor, table, wall or unusual hanging planters can be made from many types of materials. The most important thing is that it is strong enough and lasts as long as possible.

Planter decor

You can make them from:

sand and cement with the addition of liquid glass
alabaster
cerensite: products from a solution prepared on the basis of calcium and aluminum salts are not only original, but also extremely durable
tree: you can use both thin slats and massive wooden decks of a suitable size, in which the central part is removed
vines: wicker planter-basket will perfectly fit into the decor of the room, finished in country style
plastic: weaving can be imitated from plastic cut into thin strips or twisted plastic bags;
heat-resistant clay
papier mache
felt
yarn, braid, twine, strong synthetic threads: they are smeared with glue and wrapped around containers of a suitable size

For decor, they use burlap, original weaving cotton fabrics, twine, colored stones, nutshells, grain, tree bark, dried flowers, fur, paints and enamel, etc. A more massive planter for garden flowers is made from rubber wheels.

Original flower pot decor with wooden clothespins

Do not forget that the shape of the container should be combined with the outline of the plant. After all, even the most unusual flower in the wrong pots will look ridiculous.

Interesting ideas for decorating your favorite cottage with your own hands

Cement products of unusual shape

Yes, don't be surprised. From an ordinary cement-sand mortar, you can create a very original product. It can be left unfinished - in this case, only an unusual shape will be an ornament.

Making a flower pot out of cement and fabric is extremely easy.

Making flower pots from cement and fabric is extremely simple

Paint and decorate the finished planter with shells, pebbles, rhinestones, broken glass, wood chips, buttons, feathers, fabric, lace, bright paper napkins soaked in varnish or glue, etc.

Main stages of work

Any plastic jars can be used as a form - a smaller container is inserted into a large one, and a solution is poured between them.

A more original design is obtained by using burlap or old waffle or terry towels. You can also use tulle - in this case, a characteristic pattern will be visible on the product.

The fabric is soaked in a solution, and then draped, laying out on a stand, for example, a bucket turned upside down or any other container.The cement should not be too liquid, otherwise it will simply drain off the fabric.

When using fabric, the product will turn out to be thin-walled, so it is better to add a little liquid glass or tile adhesive to the solution. The solution will turn out to be more plastic, and when it dries, microcracks do not form on the product.

The fabric soaked in the solution is laid out on pre-prepared forms.

1Cement is better to take the highest quality, brands M400 or M500. The proportions for making the mortar will be 1:2:1 (cement, sand, glue). It is added last to the already prepared mixture.

2You can determine how much solution you need using a simple method. In the container that you will use as a mold, you need to lay the fabric that you plan to use to make the product. Pay attention to how much it took. That is how much or a little more you will need a solution.

3To make the product durable, the sand must be taken dry and necessarily sifted. Otherwise, small pebbles, falling out, will quickly render the product unusable.

4First, dry ingredients are mixed, and only then water is added to the solution.

5To knead it, it is more convenient to use a drill with a special nozzle. In this case, it mixes perfectly, without lumps.

6The burlap or towel is immersed in the solution. In order for the fabric to be well saturated, it must be left in it for 10 minutes.

7The rag is taken out of the bucket, the solution is allowed to drain a little, it is laid out on the prepared forms for drying and draped.

8When using a mold for making flowerpots (see photo), after pouring the solution, it is pierced with any improvised object (you can just use a stick) in order to remove voids that can reduce the strength of the vessel.

9In order for the cement not to stick to the surface, you must first simply cover the form with a plastic bag.

10If you stick a cloth moistened with concrete around the form, and then tie it over with twine, you can get a cache-pot in the form of a bag from gypsum.

A more decorative planter for indoor flowers is obtained by using alabaster or white cement. It costs a little more than a regular building one.

Drying products. decoration

In order for the product to dry evenly, especially in the heat, it is better to cover it with a damp cloth. Drying time is 24-72 hours. Before this time, it is not recommended to touch the pots - the solution may crack.

Ready dried blanks

Detected defects (small cracks or bubbles) can be repaired with silicate glue. By adding color pigment to it, you can paint the product in the desired color. For painting, you can use special paint for concrete. There is even a special color for the solution, which is added immediately when kneading.

You can paint the product in any color you like. Cement planters look original, on which the texture of wood is drawn with a brush and paints.

Cement outdoor planters

The uneven edges of the product and minor imperfections in the form of burrs and cement sagging are cut off with a hacksaw. Small defects can be removed with sandpaper. Do not forget to also drill small holes in the bottom of the container for drainage. You can decorate a ready-made planter with pebbles, mosaics, shells, tree bark soaked in an adhesive composition. Most importantly, do not overload the product with decor so that the planted plant does not get lost against its background.

If you want to visually expand the room, it is better to choose for growing bushy plantsseated in squat low containers. To make the ceilings visually higher will help elongated flower pots with tall indoor flowers.

Do-it-yourself playground in the country: playground, sports

Wicker flowerpot-basket

In the classic version, vines or wicker are used for weaving.. But, if there are no branches at hand, you can use plastic cut into thin strips or even old newspapers and thin paper.

To protect against moisture, such products must be covered with glue or varnish.

Preparation of willow twigs

Weaving a planter from a thin and flexible vine turns out to be more decorative. But, since grapes are grown only in the south of Russia, we will use willow branches.

The optimal time to collect raw materials is early spring during bud break or July-August.. The branches must be selected of the same length, as straight as possible, long and flexible, up to 3 mm thick. They are cut at an angle of 45 ° with secateurs. To test the flexibility, the rods are bent at 90 ° - they should spring easily.

For weaving, both unpeeled rods and branches with completely removed bark are used.

In the latter case, it is better to collect raw materials in the spring - the bark separates better from such a rod. To remove it, use a special tool - a pinch. It is made from a thick branch with a split in the upper part. If the raw materials were collected in advance, before starting work, the branches are “revitalized” - they are soaked in hot water for 4-5 days.

To obtain a more intense color of the rods, they are boiled in hot water for about half an hour.

Weaving methods

Weaving the bottom of the planter basket

For a small planter, you will need about 8 rods about 30 cm long:

1In the center of 4 blanks, it is necessary to make a cut so that 4 more branches can be inserted there.

2Weaving starts from the bottom. We select the thinnest rods and begin to braid the crossed branches with 4 pieces at a time.

3After a few rows (their number depends on the size of the bottom of the future pots), we begin to braid already two, and after another 3-4 rows, one branch each. Braided workpieces should be fanned out at an equal distance from each other.

4When the size of the bottom is sufficient, we fix the remaining tips of the branches, interlacing them with horizontally located branches of weaving.

5Thicker rods are needed to form the walls. They are pushed one by one into the weaving of the bottom next to the braided branches.

6We carefully bend the rods so that they are perpendicular to the bottom and tie them at the top so that they do not interfere with work.

7We begin to braid each of the branches located horizontally.

8At the end of the work, we form the edges of the pots. To do this, we twist them with thin branches together with the remaining thick ends of the rods into a braid.

9So that the tips are not too conspicuous, they are cut obliquely at an angle of 45 °.

10If you want to make a planter in the form of a basket with a handle, you need to take a rod, bend it and insert it on the sides of the product. Then it is wrapped around with a bunch of thin branches twice. The second time a bunch of rods is pushed between the gaps of the first branches.

Thin branches can simply be glued horizontally around the perimeter of any container. For reliability, they are tied at the top and bottom with twine.

Landscaping your site with your own hands - (130+ Photo Ideas & Videos) + Reviews

Newspaper weaving

How to make planters out of newspapers? The process of its creation is similar to the manufacture of planters from willow branches.. The only thing is that the paper must be properly prepared for work.

Preparation of blanks

To obtain strong "twigs" the newspaper must be twisted.

For this:

1The paper is cut into fairly wide strips 6-7 cm thick.

2Each of the strips is laid on a long knitting needle at an angle of 35-30°.

3We begin to wind the paper on the knitting needle as tightly as possible, holding the tip of the newspaper with your finger for convenience.

4Glue the remaining edge in such a way that we get a thin tube. One end should be slightly thicker than the other, so that in the future we can build it up by inserting one into the other. The length of the workpiece depends on the size of the future crafts.

5We take a knitting needle out of the tube and dry the glued place for 15-20 minutes.

6The resulting blanks can be immediately painted with gouache, watercolor, acrylic paints.For these purposes, non-standard pigments are also often used - for example, iodine, henna, basma, water-based wood stain, food dyes, etc. When creating patterns, finished products are coated with dye.

7To strengthen and protect against moisture, the finished pots are varnished. The first time it is better to do this at the stage of preparations. The second time the finished product is painted over.

Describe in detail how to weave a planter from plastic bottles, we will not. The scheme of work is completely similar to weaving from newspapers or willow twigs.

Finished paper pot

Hanging planters are best used in rooms with enough light. If the room goes to the shady side, it is better to grow indoor flowers on the window, where there is more lighting.

Newspaper weaving methods

A standard wicker planter consists of a bottom, which is made separately, and a side. Any container can be used as a form: from a bucket to a small jar.

There are many types of weaving. In difficult cases, several tubes are woven at once.

Paper weaving step by step

We will focus on the simplest:

1First you need to prepare the frame in the form of a set of rays emanating from the center of the bottom. This will require 12 tubes. They must be divided into 2 parts of 6 pieces and fasten each of them with a clothespin.

2We fold both parts perpendicular to each other on a flat surface so that their intersection is in the center.

3We glue them together at the junction.

4We take a new tube, bend it in half and place the bend under any of the 4 crossed parts.

5We begin to gradually braid them using the “rope” method, alternately wrapping each part around.

6After 2 rows are intertwined, we begin to wrap around not several blanks at once, not 4, but 2 tubes each.

7After a few more rows, we begin to braid each tube.

8When the bottom is ready, we start weaving the wall. We take a suitable jar or other container and put it in the center of the bottom. So that the light form does not move out, it is better to fill it with something heavy, for example, stones.

9Using a knitting needle, we make a small hole in the weave next to the stand-up tube and insert a new blank from a twisted newspaper into it, slightly bringing the edge out.

10The second tube must be brought under the adjacent rack.

11So that the blank twisted from paper does not break when folded, it is gently crushed, and then placed perpendicular to the bottom.

12We begin to alternately braid each of the racks with the help of 2 tubes.

13To make the blanks softer, they must be periodically kneaded by hand.

14The distance between them should be the same, so the racks need to be adjusted periodically, setting them in the right place.

16The remaining ends of the tubes are interlaced vertically through several rows using a knitting needle. Excess ends are cut off.

17To make the finished weaving look neat, at the end of the work, the racks are refueled with a knitting needle in several rows of weaving and cut off.

Dark-colored pots always heat up more in the sun, so they can only be used for heat-loving plants.

How to make a bird feeder with your own hands? 19 original ideas (180 Photos & Videos) + Reviews

Papier-mâché planter

If the collection of flowers is large, it is quite expensive to purchase flowerpots for each of them. When using improvised means, you can not only save a lot, but also get the most unusual decorative items. The original floor or hanging papier-mâché planter can complement the collection of flower pots.

papier mache cups

Paper-glue mass is an excellent material, which is easy and simple to work with.

But it is better to use a painted and varnished product for planting flowers that are not irrigated with water.

So, let's describe the process of creating papier-mâché planters:

1We will glue a plastic container so that moisture does not dissolve the paper over time. You can use a bucket of mayonnaise.

2The container must first be degreased, and then coated with a primer for better adhesion (you can use ordinary glue).

3To begin with, we prepare the paste. For half a liter of cold water you will need a large spoonful of flour. It is brewed to a boil, not forgetting to stir so that lumps do not form.

4We tear thin paper or newspapers into pieces 4x4 cm in size. It is not recommended to use scissors and cut them - only with your hands.

5Thoroughly mix the paste with torn paper.

6To strengthen the solution, you can add wood glue. A more homogeneous mass is obtained by adding chalk to the paste.

7You can also mix the composition with gypsum, clay or sawdust.

8When using cardboard, it must be torn into smaller pieces and first soaked in plain water, and then mixed with paste. The resulting mass is pre-wrung out by hand, dried and ground on a grater.

9We begin slowly, pressing tightly, apply the solution to the jar. We do not touch the bottom.

10Our product will dry for several days.

11With the help of papier-mâché, you can simply decorate any container using the decoupage technique. To do this, blanks in the form of flowers or figures are prepared from paper and glue. Then they are glued to the pots and varnished. The gaps between applications can be decorated with decorative paper napkins.

12Paint the work with watercolor, gouache or acrylic. The final stage is varnishing to give water-repellent properties.

13A planter in the form of a stump looks very original. To do this, dried papier-mâché is first dyed with black paint, and then with a second layer of smears of ocher-colored dye.

Finished work from papier-mâché

Flower pots made of wood look very original. But, since such material will quickly begin to rot upon contact with moisture, it is better to make a larger container into which it will be possible to “hide” a plastic planter.

Projects of country houses for 6-10 acres: 120 photos, description and requirements

Gypsum planters

To work, you need 8-10 tablespoons of dry rotgypsum

The execution technique is similar to the technology of working with cement mortar.

1To make the finished product easy to get, the mold must first be lubricated with oil.

2It will be more convenient to remove the dried pots from gypsum if the plastic jar-form is cut in advance with a knife, and then temporarily glue both halves with adhesive tape.

3We will need two containers, one slightly larger than the other. We will insert them into each other, pouring a solution between them.

4First, pour the gypsum mixture only on the bottom of the container. The solution needs to stand and get stronger, and only then continue to work.

5We insert the second container inside the first and fill the gap between them with a solution.

6The work can be simplified if you pour a gypsum mixture on the bottom, and then press it in with a second container so that the solution comes out to the very edge of the pot.

7We seal the solution with a wooden stick so that no voids form inside.

8We leave the finished pots to dry completely for a day.

9If desired, you can use a tool for cutting the cuticle of nails or a thin stick on a half-dried product (it must first stand for 7-8 hours) to cut out various patterns.

Original flower pots made of gypsum

When making planters, do not forget about the drainage holes that are made in the bottom of the container. Otherwise, the water in it will stagnate, and the roots of the plant will quickly rot.

Veranda attached to the house - expanding the living space: projects, tips on how to create your own hands (200 original photo ideas)

Clay pot

There are never many flower pots, so we will do the next work from clay. For these purposes, it is necessary to purchase a special one that does not require firing. Such mixtures are sold in stores selling supplies for artists.

Clay decorative item

This type of clay hardens in air during the day without any firing.

It is beautifully painted and polished.

1Before sculpting, too dry lumps are soaked with water.If the clay is plastic enough, this is not required.

2At first, it is carefully crushed so that voids and bubbles do not form inside, and then rolled out with a rolling pin to the desired thickness.

3The resulting "pancake" is cut into pieces.

4We put any container on the resulting layer and cut off the bottom.

5Using a long narrow strip, wrap the walls of the mold.

6Wet your hands with water and iron the resulting seams.

7Cut off the excess with a knife.

8After drying for 1-2 days, the product is carefully polished to a shine.

9We paint the finished pots or cover it with varnish.

Use of old items

You can turn any objects that have served their age, sometimes the most unexpected ones, into a flower pot. For example, plant plants in an old salad bowl or teapot. If the product has a small crack, it does not matter - it can be deployed to the wall, making it invisible.

Pots made of transparent materials, for example, glasses or plastic bottles, look unusual. For decoration, light stones are poured onto the bottom, then earth. The top layer is decorated with a layer of dry sawdust.

Felt planters

How do you like a flower pot made from an old cosmetic bag? Or street planters from bags (photo)? Agree, unusual. As well as products in the form of large shells, shoes, open suitcases and even jeans cut to the knee.

Planters from bags

You can even use a whole coffee table as a planter, placing all kinds of plants in its open drawers. Maybe your imagination will give you more creative ideas.

Petunia: description of the 20 best varieties

Planter decoration

A planter with an original design does not have to be made from scratch. You can also use standard flower pots or containers that are suitable in size. They can be painted with paints, pasted over with paper napkins or cloth.

Flower pots are made from macrome. Craftswomen who know how to hold knitting needles or a crochet hook in their hands can prepare knitted “clothes” for a cache-pot. Lace, fabric, beads, buttons, coffee beans and cereals, etc. are also used for decoration.

Original idea using pencils

When decorating with eggshells, it is preliminarily degreased in a solution of baking soda. After drying, the pieces are coated with glue and applied to the surface with a convex side.

If the distance between them turned out to be significant, small pieces are added to the gaps or uncovered areas are covered with crushed shells. Then the product is coated with PVA glue, and after drying, varnished.

How to make a cellar in a private house or in the country with your own hands: diagrams, step by step guide, proper ventilation (55+ Photos & Videos) + Reviews

Mosaic planter

Give a second life to an accidentally broken vase or tile by using it as a flower pot decor. In addition to fragments of any size, we need glue for ceramics and a special grout for joints.

Flower pot decorated with mosaic

1To get fragments, use a tile cutter. If it is not at hand, wrap them in a thick rag and beat with a hammer.

2We disassemble the fragments according to the size and color of the picture, setting aside the suitable ones.

3We coat the prepared container with glue and glue the fragments.

4The gaps between them are filled with grouting compound. Remove the excess with a cloth immediately, before drying.

5We varnish the finished product if desired.

Using twine

With the help of inexpensive jute twine, you can get an antique-styled product.

So, let's describe the process of creating flower pots from a rope for flowers:

1To work, you will need a clay or plastic flower pot, twine and glue.

2Apply a drop of glue to the top of the container.We fix the twine and begin to tightly wrap the container, fixing it with glue every 3-4 turns.

3Having reached the edge of the pot, cut the rope and fix it with glue.

4Part of the container, for example, the bottom, center or top, can be painted in a different color. To do this, we fix paper tape in the right place. We paint over part of the product. The adhesive tape must be removed before the paint is completely dry.

5If you paint the pots in the same style, but with different patterns, you can get an original flower arrangement.

Jute twine decoration

Decorating with fabric or lace

You can use any original fabrics, border for curtains, tulle or lace. Since this material is inexpensive, you can arrange flower pots throughout the house in the same style and color scheme.

Lace and twine trim

1To understand what size we need a piece of fabric, you need to roll a flower pot over it. Thus we find out its height. A few centimeters must be left for the hem. You can find out the diameter of the planter by measuring it at its widest point.

2For convenience, a regular medical syringe is filled with moisture-resistant glue. The composition will be applied more evenly.

3Apply glue to the container from top to bottom with a strip. We apply the fabric and smooth it with the palm of our hand. We glue one more strip. With this step-by-step fastening, you can perfectly adjust the tension of the fabric

4The last edges are attached with a slight bend along the top and bottom. In order for the fabric to lie flat, it must be cut in several places and glued with an overlap.

5The last stage is the coating of the finished planter with varnish. Please note that after this the fabric will darken a little.

There are many ideas for making pots. The author of this video suggests making unusual:

How to make flower pots with your own hands: outdoor, for home, hanging

How to make a pot of gypsum with your own hands

How to make flower pots with your own hands: outdoor, indoor, hanging | Step by Step Charts (120+ Original Photo Ideas & Videos)

9.4 Total Score

flower pots

Feedback from our readers is very important to us. Leave your rating in the comments with the reasoning behind your choice. Thank you for your participation. Your opinion will be useful to other users.

Appearance

9.5

Originality

9.5

Expenses

7.5

Buyer ratings: 5 (1 vote)

How to make flower pots with your own hands: outdoor, indoor, hanging | Step by Step Charts (120+ Original Photo Ideas & Videos)

What materials are best to use?

Cement products of unusual shape

Main stages of work

Drying products. decoration

Wicker flowerpot-basket

Preparation of willow twigs

Weaving methods

Newspaper weaving

Preparation of blanks

Newspaper weaving methods

Papier-mâché planter

Gypsum planters

Clay pot

Use of old items

Planter decoration

Mosaic planter

Using twine

Decorating with fabric or lace

How to make a pot of gypsum with your own hands

Veranda attached to the house - expanding the living space: projects, tips on how to create your own hands (200 original photo ideas)

Landscaping your site with your own hands - (130+ Photo Ideas & Videos) + Reviews

How to make a swing with your own hands: design features, step-by-step instructions (drawings with dimensions) | (100 Photos & Videos)

Do-it-yourself hidden wiring detector ??? | Scheme + Instruction

Making reinforced concrete poles for the fence with your own hands

Tired of constantly getting tangled in wires? ⚡ Just make a reel for an extension cord from a plastic canister?

Leave feedback Cancel